how to compare to ribbed and flat slab

Comparison between Ribbed Slab Structure using Lightweight ...slab without beams (It could be called flat plate system or the flat slab. Only the column supports and slab can be of this type), (iii) Two-way ribbed slab (waffle) (A ribbed slab gives considerable extra strength in one direction while a waffle slabs gives added strength in both directions). This is possible only in monolithically cast concrete [6] which is the two way grid of beams. In comparison to solid slab, the span limits of ribbed slabs are considerably longer. So, longer span and light to.

cost comparison between conventional and flat slab structures - IRJETIn the present work conventional and flat slab. B+G+3 storey building is considered for cost comparison. The building is considered to be situated in earthquake zone 2. For earthquake loading, the provisions of IS:1893 (Part- 1)-2002 are .... flat slab. slab thickness. 250 mm. Size of rib beam 230 mm × 600 mm. Column size. 230 mm × 750 mm, 300mm× 750mm. Figure 4 shows plan and elevation of building adopted for this study. Detailed step by step procedure adopted for modeling ...

Flat Slab and Ribbed or Waffle Slab Secrets - My CivilAs compared with the ribbed slab is that, due to absence of beams flat slabs are more prone to failure in Shear and also if columns are not sufficiently closely spaced then the slab as it is not being subdivided with supports of beams the effective slab panels are much bigger in size on plan, due to above facts slabs thickness increases much and also the amount of reinforcement increases manifold, making the whole structure much expensive affair than regular slabs and in many ...

Comparison between Ribbed Slab Structure using Lightweight ...Comparison between ribbed slab Structure using Lightweight Foam Concrete and Solid slab Structure using Normal Concrete.

Comparison study for various structural slab systems | Ismaiel ...Comparison study for various structural slab systems Table of contents 1.0 Objectives 2.0 Proposed Structural slab Systems. 2.1 Beam and slab Floor System 2.2 ribbed (Waffle) slab System 2.3 flat slab Floor System 2.4 Hollow core slab system 2.5 Post tension slab system 2.6 Voided slab system 2.7 Composite steel deck slab system 3.0 slab system comparison 4.0 Conclusion 1.0 Objectives The main objective of this report is to present different structural flooring that are ...

16 Different types of slabs in construction | Where to use? | - Civil ReadDifferent types of concrete slabs flat one & two way, hollowcore ribbed, hardy, arch, sunken, grade post tension pre, pitch roof, sunshade, waffle slab. ... It requires more formwork when compared with the flat slab. and there is no need of providing column caps in conventional slab. The thickness of conventional slab is 4 or 10cm. 5 to 6 inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. Normally it is square in ...

Two-way ribbed flat slabs with shafts - SciELO5 Aug 2014 ... This work compares experimental results of six two-way reinforced concrete ribbed flat slabs with rectangular holes close to the column and without shear reinforcem

Comparison of Analysis Methods of Flat Slab - IJIRSTI. INTRODUCTION. A slab is a flat two dimensional planar structural element having thickness is small as compared to its other two dimensions. It provides a working flat surface or a covering shelter in buildings. It primarily transfers the load by bending in one or two directions. Reinforced concrete slabs are used in floors, roofs and walls of buildings and as the decks of bridges. The floor system of a structure can take many forms such as in situ solid slab, ribbed slab or pre-cast units.

Product Details

Product List